So a friend of mine and I have recently become new owners of a set of Killing Floor servers that were at risk of shutting down. We moved everything over from the old location to the new with no problems. We added the servers on here, but it appears that the query ports for 3 of the 4 were entered wrong when they were added on here. Could you guys be able to switch the query ports to the actual ports? The join ports are correct. Below are the servers, the current query ports, and the new ports to replace the old ones.

When I went to update the query port in the red box, it wasn't coming up with anything, so this is why I'm asking for help here.

IP of 1st: 192.223.29.49:7709
Current query port: 7721
NEW QUERY PORT: 7719

IP of 2nd: 192.223.29.49:7711
Current query port: 7723
NEW QUERY PORT: 7721

IP of 3rd: 192.223.29.49:7713
Current query port: 7725
NEW QUERY PORT: 7723

The names of the servers should change afterwards to reflect the actual query ports connected to the server IPs after this is done.

Thanks in advance!

- Conkerfan91/Conky

1st IP: You appear to have already done it.
2nd IP: There is no server running with query port 7721. GT will only allow the change if there is a server running with the respective query port.
3rd IP: Because of not being able to change #2, I cannot change number 3 (because two pages cannot have the same ports).

burn wrote:
1st IP: You appear to have already done it.
2nd IP: There is no server running with query port 7721. GT will only allow the change if there is a server running with the respective query port.
3rd IP: Because of not being able to change #2, I cannot change number 3 (because two pages cannot have the same ports).
Odd with the first one because I noticed it was offline, changed the port in the red box, and it worked when before it didn't.

As for the 2nd server, I checked the query port as it's running on query port 7721 and is running, but on here it shows it as 7723 which isn't correct. I'll restart it as there's nobody on and see if that works.

That seems to have solved it, I have updated the other two query ports

burn wrote:
That seems to have solved it, I have updated the other two query ports
Thank you, sir for the help, and you have a nice day.